Eureka Pumps 1 Phase / 3 Phase Vertical Open well submersible pumps variants are designed to give best Hydraulic efficiency with Heavy Duty Water filled Submersible Motor portions. These are highly capable to pump the water at Higher Heads by consuming less Energy.

Pump’s volute chamber and Impellers are designed to give the best possible hydraulic efficiency. Dynamically balanced impeller offers vibration free operation with long life.

Pump’s volute chamber and Impellers are designed to give the best possible hydraulic efficiency. Dynamically balanced impeller offers vibration free operation with long life.

Motor portions are designed to withstand higher axial thrust loads with SS loose Segment Thrust Bearing with low friction Carbon thrust pad.

Pumps are designed in such a way to repair very easily and Install. The Motor Bush bearings of LTB4 Grade with adequate sizes will ensure long endurance of the pump set. The double Lip oil seals will prevent the motor from ingress of foreign particles in to the motor.

The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss steel laminations.

Motor must be filled with clear, cold, drinking water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.

The Stator and pump jackets were made SS 304 Stainless steel avoid rust formation.

The powder coated C.I Components of the pump set will ensure more Casting components life so that, pump set life will be extended for the years.